Shop Floor Gage Setting and Part Measurement System

Series : GAG-MT

Characteristics:
This package features the MIC TRAC as a multi-use gage setting system. The system sets or zeros most gages
with the use of interchangeable anvils or blocks. Standard resolution of base unit is .00005”.
Accuracies range from ±.0001” to ±.0004”. The Digital Read Out (DRO) is CE approved.
MIC TRAC base unit w/ range: 0” to 12” with TF-PL block and shipping carton
MT-3012-50 BASIC GAGE SETTING SYSTEM
GAGE SETTING SYSTEMS OPTIONS:
Expand or upgrade the basic gage setting system with the addition of other accessories and setting blocks.

04
MIC TRAC SETTING BLOCKS:
The MIC TRAC 3000 setting blocks are replaceable anvils that have an accurate taper ground into the gauging
surfaces. The setting blocks are supplied in sets of 2 and mount on the MIC TRAC 3000 receiver blocks.

Model Description
SHALLOW TAPERED CYLINDER SETTING BLOCKS (2 Block Sets) (BX-1000)
GAG-TF-10 Tapered Setting Blocks 10° half angle
GAG-TF-15 Tapered Setting Blocks 15° half angle
GAG-TF-20 Tapered Setting Blocks 20° half angle
GAG-TF-30 Tapered Setting Blocks 30° half angle
GAG-TF-50 Tapered Setting Blocks 40° half angle
SPECIAL PURPOSE SETTING BLOCKS
GAG-TF-.5F Flat Face Setting Blocks (1.000” outside dim.)
GAG-TF-1F Universal flat face setting/ measuring blocks (1.500” outside dim.)
GAG-TF-PL Flat Face Setting Blocks, No taper (supplied with MIC TRAC)
API 6A RING GROOVE SETTING BLOCKS
GAG-TF-BX 23° angled face setting blocks (2 per set)
THREAD GAGE SETTING BLOCKS
GAG-TF-1V 1-5 pitch 60° “V” thread setting blocks (2 per set)
GAG-TF-2V 6-20 pitch 60° “V” thread setting blocks (2 per set)
TUBING AND CASING TAPER SETTING BLOCKS
GAG-TF-STR Straight Blocks
GAG-TF-.75T ¾” Tapers Blocks, 8 & 10 Round, ¾” TPF Buttress, Line Pipe
GAG-TF-1.0T 1” Taper Blocks, 1” TPF Buttress
GAG-TF-1.12T 1 1/8” Taper Blocks, 1.125 TPF Connectors
GAG-TF-1.75T 1 ¾” Taper Blocks, 3.0 TPF Rotary Shouldered Connectors
Rotary Shouldered Connector Setting Blocks
GAG-TF-1.25RSC 1 ¼” Taper Blocks, 1.25 TPF Rotary Shouldered Connectors
GAG-TF-1.5RSC 1 ½” Taper Blocks, 1” TPF Rotary Shouldered Connectors
GAG-TF-2.0RSC 2” Taper Blocks, 2.0 TPF Rotary Shouldered Connectors
GAG-TF-3.0RSC 3” Taper Blocks, 3.0 TPF Rotary Shouldered Connectors
Special Taper Blocks Available
SPECIAL FLANGE GROOVE SETTING BLOCKS
GAG-TF-BX 23° BXR Ring Groove Diameter/ Width Setting Blocks
MRP STRAIGHT FACE SETTING BLOCKS
GAG-TF-1F-T Flat face setting blocks to accept riser block (T-Shape)
RISER BLOCKS FOR THE TAPER BLOCKS
GAG-TF-RISER1 1.00” Riser Block (Set of 2)
GAG-TF-RISER2 1.00” Riser Block (Set of 2)
GAG-TF-RISER3 1.00” Riser Block (Set of 2)